Welcome to the Schneider Electric Website

Welcome to our website.

You can choose another country to view available products or go to our Global website for company information.

Choose another country or region

ATSU01N232LT Product picture Schneider Electric

Range: Altistart 01

Soft start/stop units

ATSU01N232LT

ATSU01N232LT Product picture Schneider Electric
Range: Altistart 01

Soft start/stop units

ATSU01N232LT

soft starter for asynchronous motor - ATSU01 - 32 A - 200..480V - 7.5..15 KW

Show more characteristics >
Add to My Products Remove from My Products

  • Main
    range of product
    Altistart U01 and TeSys U
    product or component type
    Soft starter
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    device short name
    ATSU01
    network number of phases
    3 phases
    [Us] rated supply voltage
    200...480 V - 10...10 %
    motor power kW
    15 kW 3 phases 400 V
    7.5 kW 3 phases 230 V
    motor power hp
    10 hp 3 phases 230 V
    20 hp 3 phases 460 V
    IcL starter rating
    32 A
    utilisation category
    AC-53B EN/IEC 60947-4-2
    current consumption
    100 mA
    type of start
    Start with voltage ramp
    power dissipation in W
    2.5 W at full load and at end of starting
    322.5 W in transient state
    Complementary
    assembly style
    With heat sink
    function available
    Integrated bypass
    supply voltage limits
    180...528 V
    supply frequency
    50...60 Hz - 5...5 %
    network frequency
    47.5...63 Hz
    output voltage
    <= power supply voltage
    [Uc] control circuit voltage
    24 V DC +/- 10 %
    starting time
    1 s 50
    10 s 5
    5 s 10
    Adjustable from 1 to 10 s
    deceleration time symb
    Adjustable from 1 to 10 s
    starting torque
    30...80 % of starting torque of motor connected directly on the line supply
    discrete input type
    Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhm
    discrete input voltage
    24...40 V
    input output isolation
    Galvanic between power and control
    discrete input logic
    Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
    discrete output current
    2 A DC-13
    3 A AC-15
    discrete output type
    Open collector logic LO1 end of starting signal
    Relay outputs R1A, R1C NO
    discrete output voltage
    24 V 6...30 V open collector logic
    minimum switching current
    10 mA 6 V DC relay outputs
    maximum switching current
    2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs
    2 A 250 V AC AC-15 inductive cos phi = 0.5 20 ms relay outputs
    maximum switching voltage
    440 V relay outputs
    display type
    1 LED green starter powered up
    1 LED yellow nominal voltage reached
    tightening torque
    0.5 N.m
    1.9...2.5 N.m
    electrical connection
    4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuit
    Screw connector rigid 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuit
    Screw connector rigid 2 0.5...1 mm² AWG 17 control circuit
    Screw connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
    4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
    Screw connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit
    4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
    Screw connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
    marking
    CE
    operating position
    Vertical +/- 10 degree
    height
    314 mm
    width
    45 mm
    depth
    170 mm
    product weight
    0.49 kg
    Motor power range AC-3
    7...11 kW at 200...240 V 3 phases
    15...25 kW at 380...440 V 3 phases
    motor starter type
    Soft starter
    Environment
    electromagnetic compatibility
    Damped oscillating waves level 3 IEC 61000-4-12
    Electrostatic discharge level 3 IEC 61000-4-2
    Immunity to electrical transients level 4 IEC 61000-4-4
    Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
    Voltage/current impulse level 3 IEC 61000-4-5
    Conducted and radiated emissions level B CISPR 11
    Conducted and radiated emissions level B IEC 60947-4-2
    EMC immunity EN 50082-2
    Harmonics IEC 1000-3-2
    Harmonics IEC 1000-3-4
    Conducted and radiated emissions level 3 IEC 61000-4-6
    Immunity to conducted interference caused by radio-electrical fields IEC 61000-4-11
    EMC immunity EN 50082-1
    standards
    EN/IEC 60947-4-2
    product certifications
    CCC
    CSA
    C-Tick
    UL
    IP degree of protection
    IP20
    pollution degree
    2 EN/IEC 60947-4-2
    vibration resistance
    1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
    1 gn 13...150 Hz EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms EN/IEC 60068-2-27
    relative humidity
    5...95 % without condensation or dripping water EN/IEC 60068-2-3
    ambient air temperature for operation
    -10...40 °C without derating
    40...50 °C with current derating of 2 % per °C
    ambient air temperature for storage
    -25...70 °C EN/IEC 60947-4-2
    operating altitude
    <= 1000 m without derating
    > 1000 m with current derating of 2.2 % per additional 100 m
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    Catalogue
    Date
    Size
    Add to My Documents
    Date 2/2/17
    Size 2 MB
    Certificate
    Date
    Size
    Add to My Documents
    Date 6/19/18
    Size 65.4 KB
    Date 9/13/18
    Size 179.8 KB
    Date 5/31/18
    Size 25.6 KB
    End of life manual
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    Dimensions
    With TeSys U Combination (Non Reversing Power Base)

    Mounting on symetrical (35 mm) rail with power connector between ATS and TeSys U.


    With TeSys U Combination (Non Reversing or Reversing Power Base)

    Side by side mounting



  • Connections and Schema

    Power Wiring


    (1)
    TeSys U
    A1 :
    Soft start/soft stop unit
    QF1 :
    TeSys U controller-starter
    CU :
    TeSys U control unit

    With Reversing Unit


    (1)
    TeSys U with reversing unit
    A1 :
    Soft start/soft stop unit
    QF1 :
    TeSys U controller-starter
    CU :
    TeSys U control unit


    Control Wiring


    A1 :
    Soft start/soft stop unit
    R1A, R1C :
    Relay output NO
    COM :
    Commun
    LI1, LI2 :
    Logic inputs (stop and run functions)
    BOOST :
    Logic input (boost on start-up function)
    LO1 :
    Logic output


  • Technical Description

    Functional Diagram Automatic 2-wire Control
    Without Deceleration


    Us :
    Power supply voltage
    LED 1 :
    Green LED
    LI2 :
    Logic input
    S1 :
    Pushbutton
    LED 2 :
    Yellow LED
    Um :
    Motor voltage
    t1 :
    Acceleration time can be controlled by a potentiometer
    U1 :
    Starting time can be controlled by a potentiometer

    With and without Deceleration


    Us :
    Power supply voltage
    LED 1 :
    Green LED
    LI2 :
    Logic input
    S1, S2 :
    Pushbuttons
    LO1 :
    Logic output
    LED 2 :
    Yellow LED
    Um :
    Motor voltage
    t1 :
    Acceleration time can be controlled by a potentiometer
    t2 :
    Deceleration time can be controlled by a potentiometer
    U1 :
    Starting time can be controlled by a potentiometer


    Functional Diagram Automatic 3-wire Control
    Without Deceleration


    Us :
    Power supply voltage
    LED 1 :
    Green LED
    S1, S2 :
    Pushbuttons
    LI2 :
    Logic input
    LO1 :
    Logic output
    LED 2 :
    Yellow LED
    Um :
    Motor voltage
    t1 :
    Acceleration time can be controlled by a potentiometer
    U1 :
    Starting time can be controlled by a potentiometer

    With Deceleration


    Us :
    Power supply voltage
    LED 1 :
    Green LED
    S1, S2 :
    Pushbuttons
    LI1, LI2 :
    Logic inputs
    LO1 :
    Logic output
    LED 2 :
    Yellow LED
    Um :
    Motor voltage
    t1 :
    Acceleration time can be controlled by a potentiometer