Main range of productHarmony XB4 product or component typeComplete body/contact assembly device short nameZB4 fixing collar materialZamak sale per indivisible quantity1 head typeStandard contacts type and composition1 NO + 1 NC contact operationSlow-break contact block typeSingle device compositionBodyFixing collar connections - terminalsFaston connector (1 x 6.35 mm)Faston connector (2 x 2.8 mm) Complementary CAD overall width30 mm CAD overall height47 mm CAD overall depth37 mm terminals description ISO n°1(11-12)NC product weight0.062 kg contacts usageStandard contacts positive openingWith positive opening conforming to EN/IEC 60947-5-1 appendix K operating travel1.5 mm (NC changing electrical state)2.6 mm (NO changing electrical state)4.3 mm (total travel) operating torque0.05 N.m (NO changing electrical state) mechanical durability5000000 cycles contacts materialSilver alloy (Ag/Ni) [Ui] rated insulation voltage250 V (degree of pollution: 3) conforming to EN 60947-1 electrical durability10000000 cycles electrical reliabilityΛ < 10exp(-6) at 5 V, 1 mA in clean environment conforming to EN/IEC 60947-5-4Λ < 10exp(-8) at 17 V, 5 mA in clean environment conforming to EN/IEC 60947-5-4 customizableNo compatibility codeZB4 Environment protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...70 °C IP degree of protectionIP20 conforming to IEC 60529 standardsEN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-4EN/IEC 60947-5-5JIS C 4520UL 508CSA C22.2 No 14 product certificationsBVCSADNVGLLROS (Lloyds register of shipping)RINAUL vibration resistance5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Contractual warranty Warranty period18 months 18 months
Documents and DownloadsLanguage
Instruction sheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.